The Stem

4. Marking Guidelines for the Inner Stem

Inner stem marked to measurements shown on plans. Leave about 6” extra length at the stemhead for clamping and for support while hull is upside down. Wood can be pressure-treated Southern pine, Douglas-fir, oak, or any other firm and durable wood that holds fastenings well.

Sheerline

Forward face uppermost.

Aft face is turned upward

5. Sawing Out the Inner Stem

Saw to lines marked on forward face with the saw table tilted to 26 degrees. Leave wood above the sheer uncut for clamping.

6. Beveling the Inner Stem

Use spokeshave followed by block plane to bring surface to marked lines.

3 • BUILDING THELUMBERYARDSKIFF